Memory manager for
Kenwood TS-870


TSControl is memory manager for Kenwood rigs. It's designed to be used with TS870 but should work also with TS-450, TS-850 and TS-570 (not tested).

You can use TSControl to create, change, reorganize and remove memories. You can also save in different files your favorite frequencies.

To connect your transceiver to your computer, you should use a 5 wires cable (RX, TX, RTS, CTS, GND). The 4800 bps, 2 stop bits is not supported. All installed serials ports are supported at 1200, 2400, 4800, 9600, 19200, 38400, 57600 bps.

TSControl is totaly free.

Included in program installation.


  • 04/29/2003 Public version.
  • 05/08/2004 Saved file changed

    First column is the memory number
    Rx Mode and Tx Mode are stored as text: LSB, USB, CW, FM, AM, FSK, CW-R, FSK-R
    File is stored in CVS format. You can use a spread sheet to edit or modify files '*.ken'
    You must use same format to load in TSControl.

    Example of file:

    Pos,Lock,"Rx Freq","Rx Mode","Tx Freq","Tx Mode",Tone,Note
    1,0,1838150,LSB,0,,,"PSK 160"
    2,0,3580150,LSB,0,,,"PSK 80"
    3,0,7035150,LSB,0,,,"PSK 40"

File Date Size Description
Setup.exe 10/20/2004 706 Ko TSControl version 1.1.0, auto install file.